1985 Rolls-Royce Corniche in Cherry Grove, New York
Only Local Ads Near You! No auctions, No fees, No shipping - local pick up.
Date/Time:20 Sep, 03:15 a.m. EST
Type: Cars, For Sale - Private.
Standard Rolls-Royce V8 engine. It had an aluminium-silicon alloy block and aluminium cylinder heads with cast iron wet cylinder liners. The bore was 4.1 in (104.1 mm) and the stroke was 3.9 in (99.1 mm) for a total of 6.75 L (6,750 cc/411 cuin).
A three-speed automatic transmission (a Turbo Hydramatic 350 sourced from General Motors) was standard. A four-wheel independent suspension with coil springs was augmented with a hydraulic self-levelling system (using the same system as did Citroen, but without pneumatic springs, and with the hydraulic components built under licence by Rolls-Royce), on the rear wheels only. Four wheel disc brakes were specified, with ventilated discs.
The car used a 120.5 in (3,042 mm) wheelbase. This was extended to 120 in (3,048 mm) in xxxx and 120.5 in (3,061 mm) in xxxx.
Rack-and-pinion steering, alloy and rubber bumpers, aluminium radiator, oil cooler and a bi-level air conditioning system.
If you have any other questions : VANISH.GUION33@outlook.com